Regenerate after previous commit.

This commit is contained in:
Ruslan Ermilov 2011-09-06 13:43:04 +00:00
parent cf38eb8e59
commit 134f6e5f0a
2 changed files with 301 additions and 196 deletions

View File

@ -9,7 +9,7 @@
Enables or disables the use of asynchronous file I/O (AIO)
on FreeBSD and Linux.
</p><p>
On FreeBSD, AIO is usable used starting from FreeBSD 4.3.
On FreeBSD, AIO is usable starting from FreeBSD 4.3.
AIO can either be linked statically into a kernel:
<blockquote><pre>
options VFS_AIO
@ -21,9 +21,9 @@ kldload aio
In FreeBSD versions 5 and 6, enabling AIO statically, or dynamically
when booting the kernel, will cause the entire networking subsystem
to use the Giant lock that can impact overall performance negatively.
This limitation has been removed in FreeBSD 6.4-STABLE in 2009, and in
FreeBSD 7.
However, starting from FreeBSD 5.3, it's possible to enable AIO
This limitation has been removed in FreeBSD 6.4-STABLE in 2009, and in
FreeBSD 7.
However, starting from FreeBSD 5.3 it is possible to enable AIO
without the penalty of running the networking subsystem under a
Giant lock - for this to work, the AIO module needs to be loaded
after the kernel has booted.
@ -46,19 +46,19 @@ For AIO to work,
<a href="#sendfile">sendfile</a>
needs to be disabled:
<blockquote><pre>
location /video/ {
sendfile off;
aio on;
output_buffers 1 64k;
location /video/ {
sendfile off;
aio on;
output_buffers 1 64k;
}
</pre></blockquote></p><p>
In addition, starting from FreeBSD 5.2.1 and nginx 0.8.12, AIO can
In addition, starting from FreeBSD 5.2.1 and nginx 0.8.12, AIO can
also be used to pre-load data for <code>sendfile()</code>:
<blockquote><pre>
location /video/ {
sendfile on;
tcp_nopush on;
aio sendfile;
location /video/ {
sendfile on;
tcp_nopush on;
aio sendfile;
}
</pre></blockquote>
In this configuration, <code>sendfile()</code> is called with
@ -76,17 +76,17 @@ plus, it is also necessary to enable
<a href="#directio">directio</a>,
otherwise reading will be blocking:
<blockquote><pre>
location /video/ {
aio on;
directio 512;
output_buffers 1 128k;
location /video/ {
aio on;
directio 512;
output_buffers 1 128k;
}
</pre></blockquote></p><p>
On Linux,
<a href="#directio">directio</a>
can only be used for reading blocks that are aligned on 512-byte
boundaries (or 4K for XFS).
Reading of unaligned file's tail is still made in blocking mode.
Reading of unaligned file's end is still made in blocking mode.
The same holds true for byte range requests, and for FLV requests
not from the beginning of a file: reading of unaligned data at the
beginning and end of a file will be blocking.
@ -102,12 +102,14 @@ is used.
Defines a replacement for the specified location.
For example, with the following configuration
<blockquote><pre>
location /i/ {
alias /data/w3/images/;
location /i/ {
alias /data/w3/images/;
}
</pre></blockquote>
the request of "/i/top.gif" will be responded
with the file "/data/w3/images/top.gif".
the request of
&ldquo;<code>/i/top.gif</code>&rdquo; will be responded
with the file
&ldquo;<code>/data/w3/images/top.gif</code>&rdquo;.
</p><p>
The <code><i>path</i></code> value can contain variables.
</p><p>
@ -117,21 +119,21 @@ contain captures and <code>alias</code> should refer to
these captures (0.7.40), for example:
<blockquote><pre>
location ~ ^/users/(.+\.(?:gif|jpe?g|png))$ {
alias /data/w3/images/$1;
alias /data/w3/images/$1;
}
</pre></blockquote></p><p>
When location matches the last part of the directive's value:
<blockquote><pre>
location /images/ {
alias /data/w3/images/;
location /images/ {
alias /data/w3/images/;
}
</pre></blockquote>
it's better to use the
it is better to use the
<a href="#root">root</a>
directive instead:
<blockquote><pre>
location /images/ {
root /data/w3;
location /images/ {
root /data/w3;
}
</pre></blockquote></p><hr><a name="client_body_in_file_only"></a><strong>syntax</strong>:
<code>client_body_in_file_only
@ -188,7 +190,7 @@ Up to three-level subdirectory hierarchy can be used underneath the specified
directory.
For example, in the following configuration
<blockquote><pre>
client_body_temp_path /spool/nginx/client_temp 1 2;
client_body_temp_path /spool/nginx/client_temp 1 2;
</pre></blockquote>
a temporary file might look like this:
<blockquote><pre>
@ -212,7 +214,7 @@ Sets buffer size for reading client request header.
For most requests, a buffer of 1K bytes is enough.
However, if a request includes long cookies, or comes from a WAP client,
it may not fit into 1K.
If a request line, or a request header line do not fit entirely into
If a request line, or a request header field do not fit entirely into
this buffer then larger buffers are allocated, configured by the
<a href="#large_client_header_buffers">large_client_header_buffers</a>
directive.
@ -232,7 +234,7 @@ is returned.
Sets the maximum allowed size of the client request body,
specified in the
<code>Content-Length</code>
request header line.
request header field.
If <code><i>size</i></code> is greater than the configured value, the
<i>"Request Entity Too Large"</i> (413)
error is returned to a client.
@ -259,7 +261,7 @@ It automatically disables (0.7.15) the use of
for a given request.
It could be useful for serving large files:
<blockquote><pre>
directio 4m;
directio 4m;
</pre></blockquote>
or when using <a href="#aio">aio</a> on Linux.
</p><hr><a name="directio_alignment"></a><strong>syntax</strong>:
@ -273,42 +275,44 @@ In most cases, a 512-byte alignment is enough, however, when
using XFS under Linux, it needs to be increased to 4K.
</p><hr><a name="error_page"></a><strong>syntax</strong>:
<code>error_page
<code><i>code ...</i></code>
<code><i>code</i></code> ...
[<code>=</code>[<code><i>response</i></code>]]
<code><i>uri</i></code></code><br><strong>default</strong>:
<strong>none</strong><br><strong>context</strong>:
<code>http</code>, <code>server</code>, <code>location</code>, <code>if in location</code><br><p>
Defines the URI that will be shown for the specified errors.
These directives are inherited from the previous level if and
only if there are no <code>error_page</code> directives on
only if there are no
<u>error_page</u>
directives on
the current level.
A URI value can contain variables.
</p><p>
Example usage:
Example:
<blockquote><pre>
error_page 404 /404.html;
error_page 502 503 504 /50x.html;
error_page 403 http://example.com/forbidden.html;
error_page 404 /404.html;
error_page 502 503 504 /50x.html;
error_page 403 http://example.com/forbidden.html;
</pre></blockquote></p><p>
Furthermore, it is possible to change the response code to another, for example:
<blockquote><pre>
error_page 404 =200 /empty.gif;
error_page 404 =200 /empty.gif;
</pre></blockquote></p><p>
If an error response is processed by a proxied server, or a FastCGI-server,
If an error response is processed by a proxied server, or a FastCGI server,
and the server may return different response codes (e.g., 200, 302, 401
or 404), it is possible to respond with a returned code:
<blockquote><pre>
error_page 404 = /404.php;
error_page 404 = /404.php;
</pre></blockquote></p><p>
If there is no need to change URI during redirection it is possible to redirect
error processing into a named location:
<blockquote><pre>
location / {
error_page 404 = @fallback;
error_page 404 = @fallback;
}
location @fallback {
proxy_pass http://backend;
proxy_pass http://backend;
}
</pre></blockquote></p><hr><a name="if_modified_since"></a><strong>syntax</strong>:
<code>if_modified_since
@ -323,13 +327,16 @@ with the time in the
<code>If-Modified-Since</code>
request header:
<ul><li><code>off</code> - the
<dl compact><dt><code>off</code></dt><dd>
the
<code>If-Modified-Since</code> request header is ignored (0.7.34);
</li><li><code>exact</code> - exact match;
</li><li><code>before</code> - modification time of a response is
</dd><dt><code>exact</code></dt><dd>
exact match;
</dd><dt><code>before</code></dt><dd>
modification time of a response is
less than or equal to the time in the <code>If-Modified-Since</code>
request header.
</li></ul></p><hr><a name="internal"></a><strong>syntax</strong>:
</dd></dl></p><hr><a name="internal"></a><strong>syntax</strong>:
<code>internal</code><br><strong>default</strong>:
<strong>none</strong><br><strong>context</strong>:
<code>location</code><br><p>
@ -351,11 +358,11 @@ requests changed by the
directive of the
<u>http_rewrite</u> module.
</li></ul></p><p>
Example usage:
Example:
<blockquote><pre>
error_page 404 /404.html;
error_page 404 /404.html;
location /404.html {
location /404.html {
internal;
}
</pre></blockquote></p><hr><a name="keepalive_requests"></a><strong>syntax</strong>:
@ -375,12 +382,12 @@ made through one keep-alive connection.
The first argument sets a timeout during which a keep-alive
client connection will stay open on the server side.
The optional second argument sets a value in the
"<code>Keep-Alive: timeout=</code><code><i>time</i></code>"
&ldquo;<code>Keep-Alive: timeout=<code><i>time</i></code></code>&rdquo;
response header.
Two arguments may differ.
</p><p>
The
"<code>Keep-Alive: timeout=</code>"
&ldquo;<code>Keep-Alive: timeout=</code>&rdquo;
is understood by Mozilla and Konqueror.
MSIE will close keep-alive connection in about 60 seconds.
</p><hr><a name="large_client_header_buffers"></a><strong>syntax</strong>:
@ -392,7 +399,7 @@ buffers used when reading large client request headers.
A request line cannot exceed the size of one buffer, or the
<i>"Request URI too large"</i> (414)
error is returned.
A request header line cannot exceed the size of one buffer as well, or the
A request header field cannot exceed the size of one buffer as well, or the
<i>"Bad request"</i> (400)
error is returned.
Buffers are allocated only on demand.
@ -412,9 +419,9 @@ and
<u>http_auth_basic</u>
modules directives:
<blockquote><pre>
limit_except GET {
allow 192.168.1.0/32;
deny all;
limit_except GET {
allow 192.168.1.0/32;
deny all;
}
</pre></blockquote>
Please note that this will limit access to all methods
@ -440,7 +447,7 @@ variable:
server {
if ($slow) {
set $limit_rate 4k;
set $limit_rate 4k;
}
...
@ -457,8 +464,8 @@ Example:
<blockquote><pre>
location /flv/ {
flv;
limit_rate_after 500k;
limit_rate 50k;
limit_rate_after 500k;
limit_rate 50k;
}
</pre></blockquote></p><hr><a name="listen"></a><strong>syntax</strong>:
<code>listen
@ -492,16 +499,16 @@ Only one of <code><i>address</i></code> or <code><i>port</i></code> can be
specified.
An <code><i>address</i></code> may also be a hostname, for example:
<blockquote><pre>
listen 127.0.0.1:8000;
listen 127.0.0.1;
listen 8000;
listen *:8000;
listen localhost:8000;
listen 127.0.0.1:8000;
listen 127.0.0.1;
listen 8000;
listen *:8000;
listen localhost:8000;
</pre></blockquote>
IPv6 addresses (0.7.36) are specified in square brackets:
<blockquote><pre>
listen [::]:8000;
listen [fe80::1];
listen [::]:8000;
listen [fe80::1];
</pre></blockquote></p><p>
If only <code><i>address</i></code> is given, the port 80 is used.
</p><p>
@ -525,32 +532,32 @@ parameter can have several additional parameters specific to system calls
Starting from version 0.8.21, these parameters can be specified in any
<code>listen</code> directive, but only once for the given
<code><i>address</i></code>:<code><i>port</i></code> pair.
<ul><li><code>backlog</code>=<code><i>number</i></code> -
<dl compact><dt><code>backlog</code>=<code><i>number</i></code></dt><dd>
sets the <code>backlog</code> parameter in the
<code>listen()</code> call.
By default, <code>backlog</code> equals -1 on FreeBSD
and 511 on other platforms.
</li><li><code>rcvbuf</code>=<code><i>size</i></code> -
</dd><dt><code>rcvbuf</code>=<code><i>size</i></code></dt><dd>
sets the <code>SO_RCVBUF</code> parameter for the listening socket.
</li><li><code>sndbuf</code>=<code><i>size</i></code> -
</dd><dt><code>sndbuf</code>=<code><i>size</i></code></dt><dd>
sets the <code>SO_SNDBUF</code> parameter for the listening socket.
</li><li><code>accept_filter</code>=<code><i>filter</i></code> -
</dd><dt><code>accept_filter</code>=<code><i>filter</i></code></dt><dd>
sets the name of the accept filter.
This works only on FreeBSD, acceptable values are <code>dataready</code>
and <code>httpready</code>.
On receiving <code>SIGHUP</code> signal, an accept filter can only be
On receipt of the <code>SIGHUP</code> signal, an accept filter can only be
changed in recent versions of FreeBSD, starting from 6.0, 5.4-STABLE
and 4.11-STABLE.
</li><li><code>deferred</code> -
</dd><dt><code>deferred</code></dt><dd>
instructs to use a deferred <code>accept()</code> on Linux
using the <code>TCP_DEFER_ACCEPT</code> option.
</li><li><code>bind</code> -
</dd><dt><code>bind</code></dt><dd>
specifies to make a separate <code>bind()</code> call for a given
<code><i>address</i></code>:<code><i>port</i></code> pair.
This is because nginx will only <code>bind()</code> to
<code>*</code>:<code><i>port</i></code>
if there are several <code>listen</code> directives with
the same port and different addresses, and one of the
the same port but different addresses, and one of the
<code>listen</code> directives listens on all addresses
for the given port (<code>*</code>:<code><i>port</i></code>).
It should be noted that in this case a <code>getsockname()</code>
@ -561,11 +568,11 @@ If parameters <code>backlog</code>, <code>rcvbuf</code>,
<code>deferred</code> are used then for a given
<code><i>address</i></code>:<code><i>port</i></code> pair
a separate <code>bind()</code> call will always be made.
</li><li><code>ipv6only</code>=<code>on</code>|<code>off</code> -
</dd><dt><code>ipv6only</code>=<code>on</code>|<code>off</code></dt><dd>
this parameter (0.7.42) sets the value of the <code>IPV6_V6ONLY</code>
parameter for the listening socket.
This parameter can only be set once on start.
</li><li><code>ssl</code> -
</dd><dt><code>ssl</code></dt><dd>
this parameter (0.7.14) does not relate to system calls
<code>listen()</code> and <code>bind()</code>, but allows to
specify that all connections accepted on this port should work in
@ -573,12 +580,12 @@ the SSL mode.
This allows for a more compact configuration for the server operating
in both HTTP and HTTPS modes simultaneously.
<blockquote><pre>
listen 80;
listen 443 default ssl;
</pre></blockquote></li></ul></p><p>
listen 80;
listen 443 default ssl;
</pre></blockquote></dd></dl></p><p>
Example:
<blockquote><pre>
listen 127.0.0.1 default accept_filter=dataready backlog=1024;
listen 127.0.0.1 default accept_filter=dataready backlog=1024;
</pre></blockquote></p><hr><a name="location"></a><strong>syntax</strong>:
<code>location [
<code>=</code> |
@ -593,8 +600,8 @@ listen 127.0.0.1 default accept_filter=dataready backlog=1024;
Sets a configuration based on a request URI.
A location can either be defined by a prefix string, or by a regular expression.
Regular expressions are specified by prepending them with the
"<code>~*</code>" prefix (for case-insensitive matching), or with the
"<code>~</code>" prefix (for case-sensitive matching).
&ldquo;<code>~*</code>&rdquo; prefix (for case-insensitive matching), or with the
&ldquo;<code>~</code>&rdquo; prefix (for case-sensitive matching).
To find a location matching a given request, nginx first checks
locations defined using the prefix strings (prefix locations).
Amongst them, the most specific one is searched.
@ -612,29 +619,29 @@ However, comparison is limited to one-byte locales.
Regular expressions can contain captures (0.7.40) that can later
be used in other directives.
</p><p>
If the most specific prefix location has the "<code>^~</code>" prefix
If the most specific prefix location has the &ldquo;<code>^~</code>&rdquo; prefix
then regular expressions are not checked.
</p><p>
Also, using the "<code>=</code>" prefix it's possible to define
Also, using the &ldquo;<code>=</code>&rdquo; prefix it is possible to define
an exact match of URI and location.
If an exact match is found, the search terminates.
For example, if a "<code>/</code>" request happens frequently,
defining "<code>location = /</code>" will speed up the processing
For example, if a &ldquo;<code>/</code>&rdquo; request happens frequently,
defining &ldquo;<code>location = /</code>&rdquo; will speed up the processing
of these requests, as search terminates right after the first
comparison.
</p><p>
In versions from 0.7.1 to 0.8.41, if a request matched the prefix
location without the "<code>=</code>" and "<code>^~</code>"
location without the &ldquo;<code>=</code>&rdquo; and &ldquo;<code>^~</code>&rdquo;
prefixes, the search also terminated and regular expressions were
not checked.
</p><p>
Let's illustrate the above by an example:
Let's illustrate the above by example:
<blockquote><pre>
location = / {
location = / {
[ configuration A ]
}
location / {
location / {
[ configuration B ]
}
@ -646,13 +653,14 @@ location ~* \.(gif|jpg|jpeg)$ {
[ configuration D ]
}
</pre></blockquote>
The "<code>/</code>" request will match configuration A,
the "<code>/documents/document.html</code>" request - configuration B,
the "<code>/images/1.gif</code>" request - configuration C, and
the "<code>/documents/1.jpg</code>" request - configuration D.
The &ldquo;<code>/</code>&rdquo; request will match configuration A,
the &ldquo;<code>/documents/document.html</code>&rdquo; request will match
configuration B,
the &ldquo;<code>/images/1.gif</code>&rdquo; request will match configuration C, and
the &ldquo;<code>/documents/1.jpg</code>&rdquo; request will match configuration D.
</p><p>
The "<code>@</code>" prefix defines a named location.
Such a location isn't used for a regular request processing, but instead
The &ldquo;<code>@</code>&rdquo; prefix defines a named location.
Such a location is not used for a regular request processing, but instead
used for request redirection.
</p><hr><a name="log_not_found"></a><strong>syntax</strong>:
<code>log_not_found <code>on</code> | <code>off</code></code><br><strong>default</strong>:
@ -675,18 +683,18 @@ in a URI into a single slash.
</p><p>
Note that compression is essential for the correct prefix string
and regular expressions location matching.
Without it, the "<code>//scripts/one.php</code>" request would not match
Without it, the &ldquo;<code>//scripts/one.php</code>&rdquo; request would not match
<blockquote><pre>
location /scripts/ {
...
}
</pre></blockquote>
and might be processed as a static file,
so it gets converted to "<code>/scripts/one.php</code>".
so it gets converted to &ldquo;<code>/scripts/one.php</code>&rdquo;.
</p><p>
Turning the compression <code>off</code> can become necessary if a URI
contains base64-encoded names, since base64 uses the "/" character internally.
However, for security considerations, it's better to avoid turning off
However, for security considerations, it is better to avoid turning off
the compression.
</p><p>
If a directive is specified on the
@ -724,21 +732,23 @@ Caching of errors should be enabled separately by the
directive.
</li></ul></p><p>
The directive has the following parameters:
<ul><li><code>max</code> -
<dl compact><dt><code>max</code></dt><dd>
sets the maximum number of elements in the cache;
on cache overflow the least recently used (LRU) elements get removed;
</li><li><code>inactive</code> -
</dd><dt><code>inactive</code></dt><dd>
defines a time, after which the element gets removed from the cache
if there were no accesses to it during this time;
by default, it is 60 seconds;
</li><li><code>off</code> - disables the cache.
</li></ul></p><p>
</dd><dt><code>off</code></dt><dd>
disables the cache.
</dd></dl></p><p>
Example:
<blockquote><pre>
open_file_cache max=1000 inactive=20s;
open_file_cache max=1000 inactive=20s;
open_file_cache_valid 30s;
open_file_cache_min_uses 2;
open_file_cache_errors on;</pre></blockquote></p><hr><a name="open_file_cache_errors"></a><strong>syntax</strong>:
open_file_cache_errors on;
</pre></blockquote></p><hr><a name="open_file_cache_errors"></a><strong>syntax</strong>:
<code>open_file_cache_errors <code>on</code> | <code>off</code></code><br><strong>default</strong>:
<code>open_file_cache_errors off</code><br><strong>context</strong>:
<code>http</code>, <code>server</code>, <code>location</code><br><p>
@ -781,7 +791,7 @@ optimization needs to be disabled.
Enables or disables specifying the port in redirects issued by nginx.
</p><hr><a name="read_ahead"></a><strong>syntax</strong>:
<code>read_ahead <code><i>size</i></code></code><br><strong>default</strong>:
<code>read_ahead 0</code><br><strong>context</strong>:
<code>read_ahead 0</code><br><strong>context</strong>:
<code>http</code>, <code>server</code>, <code>location</code><br><p>
Sets the amount of pre-reading when working with files, in the kernel.
</p><p>
@ -791,7 +801,7 @@ system call is used, so the <code><i>size</i></code> argument is ignored.
</p><p>
On FreeBSD, the
<code>fcntl(O_READAHEAD,</code><code><i>size</i></code><code>)</code>
system call is used, supported in FreeBSD 9.0-CURRENT.
system call is used, supported in FreeBSD 9.0-CURRENT.
FreeBSD 7 needs to be
<u>patched</u>.
</p><hr><a name="recursive_error_pages"></a><strong>syntax</strong>:
@ -802,7 +812,8 @@ Enables or disables doing several redirects using the
<a href="#error_page">error_page</a>
directive.
</p><hr><a name="reset_timedout_connection"></a><strong>syntax</strong>:
<code>reset_timedout_connection <code>on</code> | <code>off</code></code><br><strong>default</strong>:
<code>reset_timedout_connection
<code>on</code> | <code>off</code></code><br><strong>default</strong>:
<code>reset_timedout_connection off</code><br><strong>context</strong>:
<code>http</code>, <code>server</code>, <code>location</code><br><p>
Enables or disables resetting of timed out connections.
@ -822,14 +833,14 @@ closed normally.
<code>http</code>, <code>server</code>, <code>location</code><br><p>
Sets the <code><i>address</i></code> of a name server, for example:
<blockquote><pre>
resolver 127.0.0.1;
resolver 127.0.0.1;
</pre></blockquote></p><hr><a name="resolver_timeout"></a><strong>syntax</strong>:
<code>resolver_timeout <code><i>time</i></code></code><br><strong>default</strong>:
<code>resolver_timeout 30s</code><br><strong>context</strong>:
<code>http</code>, <code>server</code>, <code>location</code><br><p>
Sets a timeout for name resolution, for example:
<blockquote><pre>
resolver_timeout 5s;
resolver_timeout 5s;
</pre></blockquote></p><hr><a name="root"></a><strong>syntax</strong>:
<code>root <code><i>path</i></code></code><br><strong>default</strong>:
<code>root html</code><br><strong>context</strong>:
@ -837,12 +848,12 @@ resolver_timeout 5s;
Sets the root directory for requests.
For example, with the following configuration
<blockquote><pre>
location /i/ {
root /data/w3;
location /i/ {
root /data/w3;
}
</pre></blockquote>
the request of "/i/top.gif" will be responded
with the file "/data/w3/images/top.gif".
</pre></blockquote>&ldquo;<code>/i/top.gif</code>&rdquo; will be responded
with the file
&ldquo;<code>/data/w3/i/top.gif</code>&rdquo;.
</p><p>
The <code><i>path</i></code> value can contain variables.
</p><p>
@ -860,13 +871,13 @@ or <u>http_auth_basic</u>
modules grant access.
<blockquote><pre>
location / {
satisfy any;
satisfy any;
allow 192.168.1.0/32;
deny all;
allow 192.168.1.0/32;
deny all;
auth_basic "closed site";
auth_basic_user_file conf/htpasswd;
auth_basic "closed site";
auth_basic_user_file conf/htpasswd;
}
</pre></blockquote></p><hr><a name="satisfy_any"></a><strong>syntax</strong>:
<code>satisfy_any <code>on</code> | <code>off</code></code><br><strong>default</strong>:
@ -894,7 +905,7 @@ Enables or disables the use of
<code>http</code><br><p>
Sets a configuration for the virtual server.
There is no clean separation between IP-based (based on the IP address)
and name-based (based on the <code>Host</code> header string)
and name-based (based on the <code>Host</code> request header field)
virtual servers.
Instead, the <a href="#listen">listen</a> directives describe all
addresses and ports that should accept connections for a server, and the
@ -903,53 +914,53 @@ An example configuration is provided in the
<u>
Setting Up Virtual Servers</u> document.
</p><hr><a name="server_name"></a><strong>syntax</strong>:
<code>server_name <code><i>name ...</i></code></code><br><strong>default</strong>:
<code>server_name <code><i>name</i></code> ...</code><br><strong>default</strong>:
<code>server_name hostname</code><br><strong>context</strong>:
<code>server</code><br><p>
Sets names of the virtual server, for example:
<blockquote><pre>
server {
server_name example.com www.example.com;
server_name example.com www.example.com;
}
</pre></blockquote></p><p>
The first name becomes a primary server name.
By default, the machine's hostname is used.
Server names can include an asterisk ("<code>*</code>")
Server names can include an asterisk (&ldquo;<code>*</code>&rdquo;)
to replace the first or last part of a name:
<blockquote><pre>
server {
server_name example.com *.example.com www.example.*;
server_name example.com *.example.com www.example.*;
}
</pre></blockquote></p><p>
The first two of the above mentioned names can be combined:
<blockquote><pre>
server {
server_name .example.com;
server_name .example.com;
}
</pre></blockquote></p><p>
It is also possible to use regular expressions in server names,
prepending the name with a tilde ("<code>~</code>"):
prepending the name with a tilde (&ldquo;<code>~</code>&rdquo;):
<blockquote><pre>
server {
server_name www.example.com ~^www\d+\.example\.com$;
server_name www.example.com ~^www\d+\.example\.com$;
}
</pre></blockquote></p><p>
Regular expressions can contain captures (0.7.40) that can later
be used in other directives:
<blockquote><pre>
server {
server_name ~^(www\.)?(.+)$;
server_name ~^(www\.)?(.+)$;
location / {
root /sites/$2;
root /sites/$2;
}
}
server {
server_name _;
server_name _;
location / {
root /sites/default;
root /sites/default;
}
}
</pre></blockquote></p><p>
@ -957,25 +968,25 @@ Starting from version 0.8.25, named captures in regular expressions create
variables that can later be used in other directives:
<blockquote><pre>
server {
server_name ~^(www\.)?(?&lt;domain&gt;.+)$;
server_name ~^(www\.)?(?&lt;domain&gt;.+)$;
location / {
root /sites/$domain;
root /sites/$domain;
}
}
server {
server_name _;
server_name _;
location / {
root /sites/default;
root /sites/default;
}
}
</pre></blockquote></p><p>
Starting from version 0.7.11, it is possible to specify an empty name "":
Starting from version 0.7.11, it is possible to specify an empty name:
<blockquote><pre>
server {
server_name www.example.com "";
server_name www.example.com "";
}
</pre></blockquote>
It allows this server to process requests without the <code>Host</code>
@ -985,10 +996,8 @@ The name checking order is as follows:
<ol><li>
full names
</li><li>
names with the prefix mask - *.example.com
</li><li>
names with the suffix mask - mail.*
</li><li>
names with the prefix mask, e.g. &ldquo;<code>*.example.com</code>&rdquo;</li><li>
names with the suffix mask, e.g. &ldquo;<code>mail.*</code>&rdquo;</li><li>
regular expressions
</li></ol></p><hr><a name="server_name_in_redirect"></a><strong>syntax</strong>:
<code>server_name_in_redirect <code>on</code> | <code>off</code></code><br><strong>default</strong>:
@ -997,9 +1006,9 @@ regular expressions
Enables or disables the use of the primary server name, specified by the
<a href="#server_name">server_name</a>
directive, in redirects issued by nginx.
When disabled, the name from the <code>Host</code> request header string
When disabled, the name from the <code>Host</code> request header field
is used.
If there's no such a string, an IP address of the server is used.
If this field is not present, an IP address of the server is used.
</p><hr><a name="server_names_hash_max_size"></a><strong>syntax</strong>:
<code>server_names_hash_max_size <code><i>size</i></code></code><br><strong>default</strong>:
<code>server_names_hash_max_size 512</code><br><strong>context</strong>:
@ -1020,7 +1029,7 @@ For more information, please refer to
<code>server_tokens on</code><br><strong>context</strong>:
<code>http</code>, <code>server</code>, <code>location</code><br><p>
Enables or disables emitting of nginx version in error messages and in the
<code>Server</code> response header string.
<code>Server</code> response header field.
</p><hr><a name="tcp_nodelay"></a><strong>syntax</strong>:
<code>tcp_nodelay <code>on</code> | <code>off</code></code><br><strong>default</strong>:
<code>tcp_nodelay on</code><br><strong>context</strong>:
@ -1043,59 +1052,63 @@ on Linux and FreeBSD 4.*;
</li><li>
send a file in full packets.
</li></ul></p><hr><a name="try_files"></a><strong>syntax</strong>:
<code>try_files <code><i>file ... uri</i></code></code><br><code>       </code><code>try_files <code><i>file ...</i></code> =<code><i>code</i></code></code><br><strong>default</strong>:
<code>try_files
<code><i>file</i></code> ...
<code><i>uri</i></code></code><br><code>       </code><code>try_files
<code><i>file</i></code> ...
=<code><i>code</i></code></code><br><strong>default</strong>:
<strong>none</strong><br><strong>context</strong>:
<code>location</code><br><p>
Checks the existence of files in the specified order, and uses
the first found file for request processing; the processing
is performed in this location's context.
It is possible to check the directory existence by specifying
the slash at the end of a name, e.g. "<code>$uri/</code>".
the slash at the end of a name, e.g. &ldquo;<code>$uri/</code>&rdquo;.
If none of the files were found, an internal redirect to the
<code><i>uri</i></code> specified by the last argument is made.
As of version 0.7.51, the last argument can also be a
<code><i>code</i></code>:
<blockquote><pre>
location / {
try_files $uri $uri/index.html $uri.html =404;
try_files $uri $uri/index.html $uri.html =404;
}
</pre></blockquote></p><p>
Example when proxying Mongrel:
<blockquote><pre>
location / {
try_files /system/maintenance.html
$uri $uri/index.html $uri.html
@mongrel;
try_files /system/maintenance.html
$uri $uri/index.html $uri.html
@mongrel;
}
location @mongrel {
proxy_pass http://mongrel;
proxy_pass http://mongrel;
}
</pre></blockquote></p><p>
Example for Drupal/FastCGI:
<blockquote><pre>
location / {
try_files $uri $uri/ @drupal;
try_files $uri $uri/ @drupal;
}
location ~ \.php$ {
try_files $uri @drupal;
try_files $uri @drupal;
fastcgi_pass ...;
fastcgi_pass ...;
fastcgi_param SCRIPT_FILENAME /path/to$fastcgi_script_name;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param QUERY_STRING $args;
fastcgi_param SCRIPT_FILENAME /path/to$fastcgi_script_name;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param QUERY_STRING $args;
... other fastcgi_param's
}
location @drupal {
fastcgi_pass ...;
fastcgi_pass ...;
fastcgi_param SCRIPT_FILENAME /path/to/index.php;
fastcgi_param SCRIPT_NAME /index.php;
fastcgi_param QUERY_STRING q=$uri&amp;$args;
fastcgi_param SCRIPT_FILENAME /path/to/index.php;
fastcgi_param SCRIPT_NAME /index.php;
fastcgi_param QUERY_STRING q=$uri&amp;$args;
... other fastcgi_param's
}
@ -1103,24 +1116,24 @@ location @drupal {
In the following example,
<blockquote><pre>
location / {
try_files $uri $uri/ @drupal;
try_files $uri $uri/ @drupal;
}
</pre></blockquote>
the <code>try_files</code> directive is equivalent to
<blockquote><pre>
location / {
error_page 404 = @drupal;
log_not_found off;
error_page 404 = @drupal;
log_not_found off;
}
</pre></blockquote>
And here,
<blockquote><pre>
location ~ \.php$ {
try_files $uri @drupal;
try_files $uri @drupal;
fastcgi_pass ...;
fastcgi_pass ...;
fastcgi_param SCRIPT_FILENAME /path/to$fastcgi_script_name;
fastcgi_param SCRIPT_FILENAME /path/to$fastcgi_script_name;
...
}
@ -1130,22 +1143,22 @@ before passing the request to the FastCGI server.
Example for Wordpress and Joomla:
<blockquote><pre>
location / {
try_files $uri $uri/ @wordpress;
try_files $uri $uri/ @wordpress;
}
location ~ \.php$ {
try_files $uri @wordpress;
try_files $uri @wordpress;
fastcgi_pass ...;
fastcgi_pass ...;
fastcgi_param SCRIPT_FILENAME /path/to$fastcgi_script_name;
fastcgi_param SCRIPT_FILENAME /path/to$fastcgi_script_name;
... other fastcgi_param's
}
location @wordpress {
fastcgi_pass ...;
fastcgi_pass ...;
fastcgi_param SCRIPT_FILENAME /path/to/index.php;
fastcgi_param SCRIPT_FILENAME /path/to/index.php;
... other fastcgi_param's
}
</pre></blockquote></p><hr><a name="types"></a><strong>syntax</strong>:
@ -1157,24 +1170,116 @@ Several extensions can map to one type.
The following mappings are configured by default:
<blockquote><pre>
types {
text/html html;
image/gif gif;
image/jpeg jpg;
text/html html;
image/gif gif;
image/jpeg jpg;
}
</pre></blockquote></p><p>
A sufficiently full mapping table is distributed with nginx in the
<code>conf/mime.types</code> file.
</p><p>
To make a particular location emit the "<code>application/octet-stream</code>"
To make a particular location emit the
&ldquo;<code>application/octet-stream</code>&rdquo;
MIME type for all requests, try the following:
<blockquote><pre>
location /download/ {
types { }
default_type application/octet-stream;
types { }
default_type application/octet-stream;
}
</pre></blockquote></p><hr><a name="underscores_in_headers"></a><strong>syntax</strong>:
<code>underscores_in_headers <code>on</code> | <code>off</code></code><br><strong>default</strong>:
<code>underscores_in_headers off</code><br><strong>context</strong>:
<code>http</code>, <code>server</code><br><p>
Enables or disables the use of underscores in client request header strings.
</p></body></html>
Enables or disables the use of underscores in client request header fields.
</p><a name="variables"></a><center><h4>Embedded Variables</h4></center><p>
The http_core module supports embedded variables with names matching
those of the Apache Server.
First of all, these are variables representing client request header
fields, such as, <code>$http_user_agent</code>, <code>$http_cookie</code>,
and so on.
It also supports other variables:
<dl compact><dt><code>$args</code></dt><dd>
arguments in the request line
</dd><dt><code>$arg_</code><code><i>name</i></code></dt><dd>
argument <code><i>name</i></code> in the request line
</dd><dt><code>$binary_remote_addr</code></dt><dd>
client address in a binary form, value's length is always 4 bytes
</dd><dt><code>$content_length</code></dt><dd><code>Content-Length</code> request header field
</dd><dt><code>$content_type</code></dt><dd><code>Content-Type</code> request header field
</dd><dt><code>$cookie_</code><code><i>name</i></code></dt><dd>
the <code><i>name</i></code> cookie
</dd><dt><code>$document_root</code></dt><dd><a href="#root">root</a> directive's value for the current request
</dd><dt><code>$document_uri</code></dt><dd>
same as <code>$uri</code></dd><dt><code>$host</code></dt><dd><code>Host</code> request header field,
or the server name matching a request if this field is not present
</dd><dt><code>$hostname</code></dt><dd>
host name
</dd><dt><code>$http_</code><code><i>name</i></code></dt><dd>
the <code><i>name</i></code> request header field
</dd><dt><code>$is_args</code></dt><dd>&ldquo;<code>?</code>&rdquo; if a request line has arguments,
or an empty string otherwise
</dd><dt><code>$limit_rate</code></dt><dd>
allows for connection rate limiting
</dd><dt><code>$pid</code></dt><dd>
PID of the worker process
</dd><dt><code>$request_method</code></dt><dd>
request method, usually
&ldquo;<code>GET</code>&rdquo; or &ldquo;<code>POST</code>&rdquo;</dd><dt><code>$remote_addr</code></dt><dd>
client address
</dd><dt><code>$remote_port</code></dt><dd>
client port
</dd><dt><code>$remote_user</code></dt><dd>
user name supplied with the Basic authentication
</dd><dt><code>$realpath_root</code></dt><dd><a href="#root">root</a> directive's value
for the current request, with all symbolic links resolved to real paths
</dd><dt><code>$request_filename</code></dt><dd>
file path for the current query, based on the
<a href="#root">root</a> and <a href="#alias">alias</a>
directives, and the request URI
</dd><dt><code>$request_body</code></dt><dd>
request body
<p>
The variable's value is made available in locations
processed by the
<u>proxy_pass</u>
and
<u>fastcgi_pass</u>
directives.
</p></dd><dt><code>$request_body_file</code></dt><dd>
name of a temporary file with the request body
<p>
At the end of processing, the file needs to be removed.
To always write a request body to a file,
<a href="#client_body_in_file_only">client_body_in_file_only on</a>
needs be specified.
When passing the name of a temporary file in a proxied request,
or in a request to a FastCGI server,
passing of the request body should be disabled by the
<u>proxy_pass_request_body</u>
and
<u>fastcgi_pass_request_body</u>
directives, respectively.
</p></dd><dt><code>$request_uri</code></dt><dd>
full original request URI (with arguments)
</dd><dt><code>$query_string</code></dt><dd>
same as <code>$args</code></dd><dt><code>$scheme</code></dt><dd>
request scheme, &ldquo;<code>http</code>&rdquo; or &ldquo;<code>https</code>&gt;&rdquo;</dd><dt><code>$server_protocol</code></dt><dd>
request protocol, usually
&ldquo;<code>HTTP/1.0</code>&rdquo;
or
&ldquo;<code>HTTP/1.1</code>&rdquo;</dd><dt><code>$server_addr</code></dt><dd>
an address of the server which accepted a request
<p>
Computing a value of this variable usually requires one system call.
To avoid a system call, the <code>listen</code> directives
must specify addresses and use the <code>bind</code> parameter
</p></dd><dt><code>$server_name</code></dt><dd>
name of the server which accepted a request
</dd><dt><code>$server_port</code></dt><dd>
port of the server which accepted a request
</dd><dt><code>$uri</code></dt><dd>
current URI in request
<p>
It may differ from an original, e.g. when doing internal redirects,
or when using index files.
</p></dd></dl></p></body></html>

View File

@ -1,12 +1,12 @@
<html><head><meta http-equiv="Content-Type" content="text/html; charset=utf-8"><title>Core Module</title></head><body><a name="example"></a><center><h4>Example Configuration</h4></center><p><blockquote><pre>
user www www;
worker_processes 2;
user www www;
worker_processes 2;
error_log /var/log/nginx-error.log info;
error_log /var/log/nginx-error.log info;
events {
use kqueue;
worker_connections 2048;
use kqueue;
worker_connections 2048;
}
...
@ -33,7 +33,7 @@ module;
</li><li>
use of variables by worker processes.
Please bear in mind that controlling system libraries in this way
isn't always possible as it's not uncommon for libraries to check
is not always possible as it is not uncommon for libraries to check
variables only during initialization, well before they can be set
using this directive.
An exception from this is an above mentioned
@ -46,9 +46,9 @@ module, unless configured explicitly.
</p><p>
Usage example:
<blockquote><pre>
env MALLOC_OPTIONS;
env PERL5LIB=/data/site/modules;
env OPENSSL_ALLOW_PROXY_CERTS=1;
env MALLOC_OPTIONS;
env PERL5LIB=/data/site/modules;
env OPENSSL_ALLOW_PROXY_CERTS=1;
</pre></blockquote></p><hr><a name="include"></a><strong>syntax</strong>:
<code>include <code><i>file</i></code> | <code><i>mask</i></code></code><br><strong>default</strong>:
<strong>none</strong><br><strong>context</strong>:
@ -60,8 +60,8 @@ syntactically correct directives and blocks.
</p><p>
Usage example:
<blockquote><pre>
include mime.types;
include vhosts/*.conf;
include mime.types;
include vhosts/*.conf;
</pre></blockquote></p><hr><a name="master_process"></a><strong>syntax</strong>:
<code>master_process <code>on</code> | <code>off</code></code><br><strong>default</strong>:
<code>master_process on</code><br><strong>context</strong>:
@ -99,7 +99,7 @@ called once per specified <code><i>interval</i></code>.
</p><p>
Example:
<blockquote><pre>
timer_resolution 100ms;
timer_resolution 100ms;
</pre></blockquote></p><p>
An internal implementation of interval depends on the method used:
<ul><li>
@ -132,7 +132,7 @@ Allowed range normally varies from -20 to 20.
</p><p>
Example:
<blockquote><pre>
worker_priority -10;
worker_priority -10;
</pre></blockquote></p><hr><a name="worker_processes"></a><strong>syntax</strong>:
<code>worker_processes <code><i>number</i></code></code><br><strong>default</strong>:
<code>worker_processes 1</code><br><strong>context</strong>:
@ -143,7 +143,7 @@ Defines the number of worker processes.
<strong>none</strong><br><strong>context</strong>:
<code>main</code><br><p>
Defines a current working directory for a worker process.
It's primarily used for writing a core-file, in which case
It is primarily used when writing a core-file, in which case
a working process should have write permission for the
specified directory.
</p></body></html>